1) Install the Flair App
Install our App from the Apple App Store or the Google Play Store. You can also use our web application on mobile and desktop browsers.
Register for an Account and Log In.
(Note: You may already have a Flair account if you have used our Forum or API)
To set up your first Puck (known as a Gateway Puck), plug it in using the Flair power adapter and follow the instructions in the App for Connecting to WiFi. Make sure your other Flair Pucks and/or Smart Vents are powered on and installed.
Alternatively, you can follow along with our video setup guide at flair.co/videosetup.
You only need to setup your first Puck on WiFi. Additional Pucks should be left as Sensor Pucks, unless you have a large system of more than 10 Flair devices. If you have more than 10 Flair devices (Smart Vents plus Pucks), please visit flair.co/large-systems to determine if you need additional Gateways.
If you have any issues connecting to WiFi using the app on a mobile device, you may try using a browser on a laptop/desktop to perform WiFi setup by going to my.flair.co
If you need to make a change to your WiFi settings at anytime, go to:
Home Settings → Puck WiFi Setup.
Change WiFi settings:
3) Rooms, Integrations, and Settings
In the App, you can create rooms, associate devices with rooms, set up integrations, and set your preferred settings.
For more info on the App settings and system configurations, refer to the sections on the App and System Configuration in this manual