Rooms can be set as active or inactive using a switch on the room tile, through scheduling, or through home and away settings.
Basically, active rooms follow set points and inactive rooms follow Away Settings.
Additionally, Flair systems using Smart Vents may use inactive rooms as "dump rooms". This allows Flair to open the Smart Vents in Inactive rooms to assist with back pressure protection by "dumping" excess air to these rooms. This helps Flair to more carefully manage active rooms.
Flair allows you to set individual rooms to active or inactive by toggling the Active switch on a room tile.
Flair will follow set points, holds and schedules in an active room.
In this example, Joe toggled the room to active at 2:29 PM. The mini split turned on and is holding at 69F.
Flair does not maintain set points, holds or schedules in inactive rooms.
For mini splits, Flair will follow the Away Settings defined for your Flair system.
Smart Vents will remain in their last position.
In this example, the Bedroom was set to inactive by a schedule event at 7:00 PM. The Away Settings for this home are set to "Off Only" so the mini split is turned off when the room is set to inactive.