Open-close vent with alexa

Answered

Comments

15 comments

  • Official comment
    Avatar
    Flair Customer Support

    Hi All,

    I checked on this and, currently, for Alexa, when Flair is in Manual mode, turning ON or OFF will turn on and off a mini split, if available. We currently do not operate Smart Vents with Alexa when Flair is in Manual Mode. I removed the earlier post that said we did to avoid further confusion.

    I'll definitely add this as a feature request because of its value to our customers. I can't give a timeline, as all feature requests are prioritized by management for inclusion in the product.

    All the best,

    Finn

    Comment actions Permalink
  • Avatar
    Purchases

    Not doing this myself, but it looks like you already can.  Have you checked this out? https://flair.co/pages/flair-and-amazon-echo-alexa

    Looks like you can tell Alexa to turn off a room which should close the vent for that room. The Flair App must be in Auto mode to use this integration.

    -1
    Comment actions Permalink
  • Avatar
    Guglaw

    Telling Alexa to turn off a room sets it to Away and telling Alexa to turn on a room sets it to Home. This does not necessarily result in the vent closing or opening unless other settings are in place. You should be able to use Alexa to say open/close vent in a room without changing any settings. It should be like an on/off switch for a light switch operated by Alexa.

    2
    Comment actions Permalink
  • Avatar
    Purchases

    +1

    I have set up the Flair skill on Alexa to test functionality and am finding what Guglaw stated to be true -- although Official Flair Support says Manual Mode is now supported in Alexa, I am not finding that to do anything but allow a room to be turned on and off -- this does not seem to relate to actually opening or closing a vent (or setting it to "Half-Open") as can be manually done in the Flair App.

    Please pass this feature request on to your developers ("You should be able to use Alexa to say open/close vent in a room without changing any settings.") or let us users know what we are doing wrong if you have actually already implemented this.  Thank you, Flair.

    2
    Comment actions Permalink
  • Avatar
    Brian Shaw

    I am also very curious about this feature. I have setup my Flair puck and smart vent to a room. Alexa Skill shows the Room as a Temperature device in alexa. When i turn it on and off it doesn't do anything. If I have the Flair home System set to auto, I do see the "active' set on and off when alexa does this toggle. the Smart vent status doesn't change.

    I am not sure if i am doing anything wrong.

    1
    Comment actions Permalink
  • Avatar
    Jacob Luedloff

    As a recent Flair purchaser, I am specifically looking for this feature of manual control to open and close the vents manually in manual mode via the Amazon Alexa integration to behave as a binary switch on/off or open/close for each vent, in addition to the thermostat control currently presented in the Amazon Alexa integration. I have a large amount of smart home integration, upwards of 40-60 devices (still installing them after moving to a new house), and I tie them all together using several automation platforms, at least until Matter standards for smart home gives better controls. The ability for integrations to interact with the vents to open and close them, regardless of the Flair Puck temperature setting, should be a straightforward implementation, however this request has been sitting for 2 years without follow up, so I wanted to ask about its status as a feature.

    Where are we at with this feature request after 2 years?

    2
    Comment actions Permalink
  • Avatar
    Jacob Luedloff

    Hi Flair, where is this feature at in the development queue so far? If it is a "not decided", that information is helpful, but a "will not do" is also helpful information to have so I don't wait for this feature. Best-case scenario is that this feature is on your roadmap, and we have a timeline (even if it slips).

    Any status would be helpful, and much appreciated.

    1
    Comment actions Permalink
  • Avatar
    Mark Brandt

    I'm looking for the status of this also. All I have is one smart vent and a puck. It's a ceiling vent and I purchased it so I didn't need a ladder to control it. I wish I didn't need the puck. I have had this a year and just tried adding it to Alexa and discovered I can't open and close this by voice. This would be such a great selling point I can't believe it can't be done. It's just software.

    0
    Comment actions Permalink
  • Avatar
    Dustin

    This is the one thing I want to do also. Just manually control my vents using Alexa. The support chat bot said I could do it before I purchased.

    1
    Comment actions Permalink
  • Avatar
    Jacob Luedloff

    I would like to emphasize that despite some misunderstandings about how the vents and pucks work together, the puck is the device that has a wifi chip and (for wifi purposes) has a constant power source from a USB adapter. The vent is generally speaking powered by batteries, and therefore does not connect directly to wifi. The vent does have a 24volt hardwire option, but the vent does not have a wifi option and therefore needs the puck to run in Gateway mode to receive commands via the app/web.

    So I understand why you need the puck, to some extent, and that the puck is its own thermostat that can control mini split units and other IR controlled climate systems.

    My concept regarding "open/close" commands would be for mini split systems it would indeed turn them on or off, but that would be an expectation for a binary choices command. Having the "open/close" and "on/off" sets of commands do essentially the same things would cut down on the feature needs considerably. It would also align with the thermostat functionality, as many thermostats still have an "off" setting for those who want a system disabled, for any reason.

    Finn, if you're still working here, would it be possible to get feedback from management on where they see this in their pipeline as a feature request?

    0
    Comment actions Permalink
  • Avatar
    Chris

    I just purchased a smart vent and bridge for the same exact reason and am now disappointed that the Flair skill does not allow my Alexa devices to manually open/close the vent. I am going to be returning this item because everything I've ready (until I came across this thread) indicated that I would be able to do what I want it to do. I don't want to have to open the Flair app and manual open/close the vent...I want an Alexa voice command to do it for me. 

    0
    Comment actions Permalink
  • Avatar
    Jacob Luedloff

    Can we get an update on where this is on the product feature requests roadmap: to manually open and close a Flair smart vent using the Alexa voice skill?

    0
    Comment actions Permalink
  • Avatar
    James C.

    Hi Jacob Luedloff and Chris,

    We have a feature request for this in our database and track demand.  I have added your votes for this feature to that request.

    Chris, I know you spoke with a member of our support team about some alternate solutions on Wednesday, January 29th.  If you have any other questions please follow up in that thread.

    Regards,

    The Flair Team

    1
    Comment actions Permalink
  • Avatar
    Dustin

    Can someone link that thread? I would like to evaluate alternate solutions also.

    1
    Comment actions Permalink
  • Avatar
    James C.

    Hi Dustin,

    The thread I was mentioning to Chris above was a support ticket he had open with us.

    Please email us -- support@flair.co -- with any questions you have or details of any issues you are trying to resolve.

    We would be happy to help!

    Regards,

    The Flair Team

    0
    Comment actions Permalink

Please sign in to leave a comment.