If you have a central system and wish to purchase Flair Smart Vents
You'll need a Bridge - this will be the hub of your Flair system and will connect to your home network.
You'll need Smart Vents for rooms where you wish to have automated vent control.
In each room with Smart Vents you will need a Puck, integrated smart thermostat, or compatible remote sensor.
- Measure your duct openings to see if we carry the sizes you need
- Identify the airflow scenario you're trying to solve
- Determine what Flair devices you need for your system
- Buy your Flair system
I have a ductless mini split, window unit, or portable
You'll need a Bridge and a Puck to control each head unit.
I have a ducted mini split
You'll need to replace your thermostat with a wall-mounted IR receiver. Check with your manufacturer for purchasing.
You'll install a Gateway Puck across from the IR receiver. The Puck will send IR (Infrared) commands to the wall-mounted IR receiver.
If you want to replace the vents in your ducted system with Smart Vents...
You'll need a Bridge and one Puck per room with Smart Vents.
Measure your duct openings to see if we carry the sizes you need.
Does Flair support my smart thermostat?
Flair integrates with Nest, ecobee, Carrier/Bryant, and WiFi-connected Honeywell thermostats.
What if I don't have a smart thermostat or one that cannot be integrated?
That's okay! Flair works with all thermostats!
Please be sure to Measure your duct openings to see if we carry the sizes you need.
I have a central system and mini split(s)
Flair will mirror your smart thermostat set point and mode to your mini split using Mirror Mode.
You'll need a Puck for each indoor head unit and integrate a supported smart thermostat: Nest, ecobee, Carrier/Bryant, or WiFi-connected Honeywell.
I have baseboard heat in some rooms
Flair can control your baseboard heating and if you have mini splits we can intelligently and automatically switch between these heating sources as conditions dictate to make your heating more efficient and effective.