William G Welch
- Total activity 23
- Last activity
- Member since
- Following 1 user
- Followed by 0 users
- Votes 3
- Subscriptions 7
Activity overview
Latest activity by William G Welch-
William G Welch commented,
What's a "Pro Puck"?
-
William G Welch commented,
I gave it a try, this is 12 hours of vent pressure readings, the grey bars are when my heat was running.
-
William G Welch created a post,
Vent pressure
I thought that "vent pressure" was measuring the pressure inside my vents. It looks to me like it is actually just measuring ambient pressure in the room. It doesn't change at all as vents are open...
-
William G Welch commented,
Why doesn't Flair have its own thermostat as an option?
-
William G Welch commented,
I tried to add a second zone for upstairs as you suggested, but I added my ecobee as the second zone upstairs. I don't have Flair vents upstairs, i am just trying to be able to see the ecobee senso...
-
William G Welch commented,
Matt, what you are describing is basically what I eventually want to have: controlling 7 vents in the basement (about 1,000 sq ft). I thought it would work with one gateway puck but it is not coope...
-
William G Welch commented,
https://1drv.ms/u/s!At0v0_VWG-wHibV89za0co9bvmLNsw?e=4zNqqh
-
William G Welch commented,
The wifi signal is fine as the OTHER flair vent is still connected. I labeled where the other Flair vent is in the picture. It is not the wifi, it is the signal between the gateway puck and the ven...
-
William G Welch commented,
Tempted to return the whole thing if it can't maintain connection at 10 ft...
-
William G Welch commented,
In this case, there is nothing but air and the ducts, does the duct material block your radio signal?? In the attached picture, when I set the gateway on the table at 7 ft away, it stays connected....