Chrissie
- Total activity 325
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 7
- Subscriptions 151
Activity overview
Latest activity by Chrissie-
Chrissie created an article,
How to find your Flair Bridge's MAC address
A MAC address is the unique identifier your router uses to recognize a device on your network. Your Flair Bridge has two network interfaces: WiFi and Ethernet, and thus has two unique MAC addresses...
-
Chrissie created an article,
Do I need a Flair Bridge?
Do I need a Flair Bridge? Do I need a Bridge for Flair Smart Vents? Do I need a Bridge if I only have Puck 2s? Can I run my Puck 2 on batteries without a Bridge? Can a Puck 2 act as the hub, or be...
-
Chrissie commented,
We have asked for this many times from the Google team without any luck. As soon as its officially available we can jump on integrating as we have done for many brands now. Our ask/suggestion is ...
-
Chrissie created an article,
Why did my Puck come back after I removed it from my home?
My Puck came back after I removed it from the appIf you wish to remove a Puck from your Flair home, you will need to complete two steps: one in the app and one on the Puck itself. This is because ...
-
Chrissie commented,
We have done some study here and are contemplating a variety of local control options. Increasingly, it looks like we should start with BacNet/Modbus over ethernet/wifi as an option to expose thin...
-
Chrissie created an article,
Puck 2 User Profiles
What are Puck User Profiles? User Profiles lets you decide how much of the HVAC system can be changed at the Puck itself. This is useful in rentals, short-term stays, and multi-unit properties, whe...
-
Chrissie created an article,
"Firmware Update Blocked - Critical Battery" notification
If you received a notification that a firmware update was blocked because of low or critical battery, the update was postponed, not failed. Flair will not install a firmware update on a Puck that i...
-
Chrissie created an article,
Adding a Puck 2 in Solo Mode when you already have a Bridge
Solo Mode lets a Puck 2 connect to your home Wi-Fi instead of to a Flair Bridge. It controls its own mini split (or other IR device) on its own, and it stays plugged in to USB power rather than run...
-
Chrissie commented,
Official comment Hi Carl,This should work great on the Puck 2. "Mode Lock" is available and on by default for ductless minisplit installations to avoid mode conflict issues and in Auto mode. Additionally, we have ...
-
Chrissie commented,
We are partnering up with the worlds largest producer of vents globally to expand out vent offering but don't have a hard timeline yet for this size or 8x12, both of which to be regionally popular ...