Puck as a sensor for a room

Room: 2 Flair vents and a Puck gateway.

Managed thru: Ecobee. Remaining rooms: Have Ecobee Remote Sensors.

In Flair App - this room appears "OFFLINE" but registers the Puck and the 2 vents.

Can somehow I can map the Puck already present in this room to set the room's temp. via the Flair App? That'll allow Flair to open/close the vents based on the Puck temp.

Note: I am NOT interested to have the Puck temp data flow back to Ecobee or interested in occupancy features. All I want is for this room's vents to open/close against the temp. in Puck or whatever I set it to, using Flair App for this room. Unfortunately currently that room appears as OFFLINE.

Official comment

Flair Customer Support

March 31, 2022 20:07

This issue was handled via a Support ticket.

FYI, Flair will display OFFLINE for a room when no temperature data is reported for the temperature sensors in that room.

If a room has a single Puck and that Puck is configured to "Ignore Puck Readings", Flair will also display OFFLINE. We are working on more appropriate wording for this condition.

Comments