Chrissie
- Total activity 311
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 7
- Subscriptions 145
Comments
Recent activity by Chrissie Sort by recent activity-
Absolutely on the "which rooms should I put vents". If the problem room perpetually gets too little air, you could consider adding a vent or you could just make sure there is a sensor in there so ...
-
Official comment Hi Larry,This is a pretty classic problem solved by the Flair system. In the app (adhoc or scheduled) or on the Puck you can make a room "inactive" and it removes that room from any averaging and ...
-
To utilize scheduling you'll need to run the system in automode. You could in theory do it in manual mode if you used the API but we don't have a scheduling option in manual mode.
-
Hi Eddy,Flair controls minisplits by leveraging the IR command inputs similar to the handsets provided by the manufacturer and then adding software enhancements on top of those. If you are current...
-
I'm really curious to follow this. Just set up and eero myself and had no issues (just set the same ssid and pw as I had previously) and everything jumped right on. In the past, the team has purc...
-
I can add a tad more context here - we are starting with an 8x8, 10x10, and 12x12 and once the 8" wide chassis is up and running, extending the length is pretty easy so we definitely hope to get th...
-
I don't have a % off hand but if I had to wager a guess it would be something like 99.5%. There are very slight ~.5mm tolerances around where the louvres meet the frame to allow them to close witho...
-
Hey Chuck,Without being able to look at the system its hard for me to know what to suggest but I went ahead and generated a ticket from this post just in case you don't end up resolving with a bit ...
-
Sal - generally we recommend a single home for most users. The rare exception is cases where within a home you want to run a zone in heat and another in cool simultanously. You might even be able...
-
Thanks for the explanation. We don't currently have an explicit 'smart set' feature however in the past we have worked around that by mapping certain range extending features to say 50 or 59 or so...