The Flair Bridge has a single LED on the front of the device. Please refer to the chart below to understand what the current LED light on your Flair Bridge indicates.
| Color | Status |
| Pulsing Blue | No ethernet cable is detected. Ready for WiFi setup. Bridge broadcasts Flair WiFi XXXX. |
| Pulsing White | Ethernet cable detected. Ready for Ethernet setup. |
| Solid Blue | Successfully connected to WiFi or Ethernet. |
| Pulsing Red |
No internet access. Try rebooting the router, then rebooting the Bridge. |
| Solid Red | Failed to connect to WiFi / Ethernet. Is the WiFi password correct? |
| Flashing Green | OTA* update in progress. |
| Solid Green | OTA* update was successful. |
| Solid Purple | OTA* update failed. |
| Pulsing Orange | Setup mode enabled. The Bridge is actively discovering new devices. |
*Over the air, meaning the update occurs over the internet connection.