Switch a Bridge Internet connection between WiFi and Ethernet

Switch a Bridge from WiFi to Ethernet

Plug an ethernet cable into the Bridge and then into your network device (typically a router, access point, or switch).  Once connected the Bridge will begin using the ethernet connection.  If you unplug the ethernet cable the Bridge will switch and use the WiFi connection.  

Switch a Bridge from Ethernet to WiFi

If you wish to switch from using an Ethernet connection to using WiFi and have never set up WiFi on the Bridge you will need to reset the Bridge and go thru WiFi setup.  Please follow the steps below to do this.

1. Reset the Bridge
2. Bring the Bridge online via the WiFi setup wizard
   1. In the Flair App tap the PLUS menu,
   2. tap "Add Flair Bridge"
   3. follow the setup wizard and when prompted select the WIFi route.
   4. You will be required to supply credentials for a 2.4GHz wireless network during this process.