Follow the instructions below to add a Smart Vent(s) to an existing Flair home.
- Prerequisites:
- Ideally, the Smart Vents should be near an existing Bridge or Gateway Puck to ensure RF range is not an issue.
- Please ensure that the Smart Vent is powered on.
- When adding the batteries you must not interrupt the boot-up sequence. as you tighten down the battery holder. We recommend that as you add the front battery holder you press down firmly from the moment you first add it until you get the screws tightened securely.
- In the Flair app, tap the PLUS sign
- Select "Add Flair Smart Vents"
- Flair will enter Setup Mode and attempt to discover the Smart Vents
- When the Smart Vents are discovered tap a Smart Vent to add it to a room (this is optional - Smart Vents can be added to rooms later)
- Tap "Done with Setup" to exit Setup Mode
In Setup mode, the light bar on the undiscovered Smart Vents should display a rotating light pattern. Smart Vents are typically discovered within a minute. It may occasionally take up to 5 minutes for Smart Vents to appear in the Flair app, so please be patient.
Once discovered, Vents will display a fixed unique light pattern. Match this pattern to the pattern displayed in the app (menu | Home Settings | Flair Devices) to find the 4-character ID of the Smart Vent.
In this example, the three discovered Smart Vents show their unique light patterns and 4-character IDs as well as the name of the room to which they are assigned.