Flair Statistics gives you access to signal strength, set point, room temperature - and more data - graphed over time. This is probably the most useful feature of our product for troubleshooting and learning more about your Flair home.
- View Flair Graphs
- Change a Graph's Data View or Time Period
- Smart Thermostat and Remote Sensor Data
- Signal Strength
- RSSI Values
View Flair Graphs
You can view data for your entire system, or for a single room.
Viewing system data:
- In the Flair app, tap the Flair menu and go to System Settings->Home Statistics
Viewing individual room data:
- In the Flair app, tap the 3-dot menu on the room tile and go to Stats
Change a Graph's Data View or Time Period
Flair collects lots of data! To view a different data set, tap "Graph Data" and select a data set. Tap "Start Time" and "End Time" to change the time period for the data to be displayed.
Note: Flair will show a maximum of one month of data. So that's one month ago until "now".
Flair offers different data options for Smart Vents and Pucks. On the left are the Smart Vent data options, and on the right are the Puck data options.
Smart Thermostat and Remote Sensor Data
If you are using an integrated smart thermostat, you can view room temperature, humidity and occupancy data for the thermostat and its remote sensors.
Scroll to the Vent or Puck graph and select "RSSI dB" under Graph Data.
RSSI stands for radio signal strength indicator. When viewing Vent and Sensor Puck signal strength, RSSI represents its connection to the nearest Gateway Puck over Flair's ad hoc network.
When viewing Gateway Puck signal strength, RSSI represents its WiFI connection.
Note: For older Gateway Pucks, signal strength will be zero.
An RSSI value greater than -70dB indicates a strong signal. An RSSI value greater than -80dB is an ok signal. An RSSI value less than -80dB suggests low signal strength.
In this graph, the Vents with signal strength below -70dB may experience connectivity issues and appear offline intermittently or consistently.