Puck 2
Can I change what my Puck 2 shows on its screen?
Yes. On a Puck 2 you can choose the home screen layout in the Flair app:
- Open the Flair app and go to Home Settings.
- Tap Flair Devices, then tap the Puck 2 you want to change.
- Tap Advanced Features, then Home Screen.
- Pick the layout you want. It applies to that Puck straight away.
The layouts you can choose from are:
- Classic — the large temperature display described in the sections below.
- Minimal — a simplified display of the current temperature and the current setpoint.
- Minimal + Weather — the minimal display with the inclusion of the current outdoor temperature / weather.
- Minimal + Humidity — the minimal display with the inclusion of the current humidity in the room.
- Gauge — analog style with a radial layout and a "hand" pointing at the current setpoint (when changing) and current temperature. Also shows the current humidity.
- Gauge+ — similar to the Gauge but has two hands, one dedicating to show the current temp and one showing the current setpoint. Also shows the current humidity.
- Orbit — a minimalist view that shows the current temperature or setpoint (when interacting) and the distance between the two along the outer radius.
This setting is available on Puck 2 only. The original Puck always uses the classic display and does not have a Home Screen option.
Puck 2 Status Icons
From left to right / top to bottom:
1) No connection to Bridge
2) No connection to Internet
3) Low Battery
4) No WiFi (when in solo mode)
Puck 1
Idle Puck
When the Puck is idle, the larger number is the current room temperature.
Rotating Puck
When rotating the Puck, the larger number is the set point.
WiFi Icon
The WiFi icon is only visible on Gateway Pucks. It uses bars to indicate signal strength. More bars equals better signal. Sensor Pucks do not display the WiFi icon.
Low WiFi Signal
Fewer bars equal lower signal.
WiFi Disconnected
A Gateway Puck that is disconnected from WiFi will show an x through the WiFI symbol.