Convert a Gateway Puck to a Sensor Puck

Follow these instructions to convert a Gateway Puck to a Sensor Puck:

1. Push the Puck face down to enter the menus
2. Rotate to the Settings menu (gear icon)
3. Push down on the face of the Puck to select
4. Rotate to "Make Sensor"
5. Push down on the face of the Puck to select
6. Wait 60 seconds for the Puck to fully reboot.

Note: The Sensor Puck can now be powered using batteries if you prefer, or you can continue to run it on AC power using the supplied cable and adapter.

The WiFi icon will likely disappear because Sensor Pucks do not maintain a constant connection to your home WiFi.  Sensor Pucks will temporarily connect to WiFI during firmware updates and when downloading IR codesets.